Create a Grimy Text Treatment with a Pen Tablet

View previous topic View next topic Go down

Create a Grimy Text Treatment with a Pen Tablet

Post by diamonds on Thu Apr 26, 2012 2:23 am

Create a Grimy Text Treatment with a Pen Tablet


I am a huge fan of the updated Appearance panel in the
Illustrator CS4. I have really found the Appearance panel to be useful
when creating type treatments that I constantly need to repeat. One of
these styles is a metal type treatment. This tutorial is pretty similar
to the Letterpress Font and Sketchy Font tutorials in that it uses the Appearance panel to create a type treatment that is fully editable when it is done.



Final Image


Below is the final type treatment we will be working towards. You
probably have seen many other metal type tutorials, but in this one you
will be able to edit the text after the effect is created!



Tutorial Detail



Step 1


Choose a font (I am using Museo Slab 700)
and type out some text with the Type tool (T). I like to start with a
clean slate in the Appearance panel, so take of any fill or stroke on
the type.



Step 2


From the pop-up menu of the Appearance panel, choose New Fill. Next,
click the swatch thumbnail in the Appearance panel of the new fill and
change the swatch to a linear gradient.



Step 3


For this step we are going to add two Color Stops to the gradient to
give us the metal effect. First click on the Gradient Slider in the
Gradient panel around in the middle of the other two Color Stops. Next,
add another Color Stop to the Gradient Slider so you have a total of
four. Change the first Color Stop to a 70% black, the second to white,
the third to 100% black and the last to a 30% black.



Step 4


Now that we have the correct Color Stops, we need to adjust the
gradient. Within the Gradient panel change the Angle to -90. Next,
select the white Color Stop and change the Position to 45%, then select
the black Color Stop and change the Position to 50%. Finally, select the
Midpoint in-between the black and 30% Colors Stops and change the
Location to 35%.



Step 5


From the pop-up menu of the Appearance panel, choose New Fill. Select
the second fill in the Appearance panel and change the linear gradient
to a two Color Stop linear gradient. Change the first Color Stop to a
32% black and the second to 100% black. Make sure the gradient Angle is
set to -90%.



Step 6


With the new fill still selected in the Appearance panel, go Effect
> Path > Offset Path. When the Offset path dialog opens, change
the Offset to 1 px. This might be different depending upon the
dimensions of your text. If you click the arrow for the latest fill in
the Appearance panel you should see the Offset effect under it.



Step 7


Make sure the two Color Stop fill is selected in the Appearance panel
and press the Duplicate Selected Item button from the bottom of the
Appearance panel. Select the new copy below the first and click the
Offset Path item. When the dialog opens, change the Offset to 2 px. Next
Change the first Color Stop in the new fill selection to 10% and the
second Color Stop to a 60% black.



Step 8


For the next couple of steps it is good idea to have the treatment on
a dark background so you can see the effects. Create a rectangle with
the Rectangle tool (M) and place it behind the other artwork.



Step 9


You can stop here if you would like but you can really jazz up the
treatment by adding some sprites. The cool thing is you can add these in
the Appearance panel as well as the other effects! Start by creating a
new fill it the Appearance panel and making sure you select the top most
item. Go Effect > Convert to Shape > Ellipse. In the Shape
Options dialog, check the Absolute radial button and change the Width
and Height to 50px.



Step 10


With the new fill still selected, change it to a radial gradient. You
only need two Colors Stops for this effect, so delete any other Color
Stops in the gradient. Next, change the first Color Stop to white with a
80% Opacity and change the last Color Stop to white with 0% Opacity.



Step 11


We can position the burst wherever we like. To do this, make sure the
same item is selected in the Appearance panel as the previous step and
go Effect > Distort & Transform > Transform. In the Transform
Effect dialog, change the Move Horizontal and Vertical positions to the
desired amount.



Step 12


With the latest item select, press the Duplicate Selected Item button
in the Appearance panel. Select the new duplicated item and press the
arrow to the left of it in the Appearance panel, showing all the effects
in the item. Click on Ellipse to bring up the Shape options and change
the Absolute Width and Height to 25px.



Step 13


With the adjusted ellipse still selected in the Appearance panel, go
Effect > Distort & Transform > Zig Zag. In the Zig Zag dialog,
change the Size to 10 px and the Ridges to 2 (you might have to change
the Size to more or less depending on the original size of your text).



Step 14


We are done! That was pretty easy. You can easily create this effect
without the Appearance panel, but creating this effect like in this
tutorial you can easily adjust anything with the text without changing
the effect. It is also a good idea to create a Graphic Style for easy
implementation to other text and objects within Illustrator. Simply
select the text with the metal treatment and press the New Graphic
Styles button in the Graphic Styles panel. Now just select some text or
other object and select your new Graphic Style!



Final Image


Below is the final image with a couple of other fonts and object with the applied Graphic Style.




diamonds

الجنس : Female

عدد المساهمات : 530
النقاط : 22360
التقييم : 7
تاريخ التسجيل : 2011-03-05

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum